[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Mower deck crisis!

I decided to go the "converted" route with a few changes. My mower deck of choice is a brand new 54 incher...because bigger is always better....! I discovered a source for new 1hp mower deck motors, mounted them to the new deck, built a nice frame to contain it all and then headed out across the lawn....:-)
That is when the wheels fell off the fantasy. :'( Seems a 54 inch mower with a full width striping roller will not turn in front of our tractors. Going straight was great, turning not so much. So I would recommend a fully suspended mower deck on casters.
My other problem is the motor height. I would love to shove my deck under the middle of my tractor. I have a new idea mid mount one. But it is exceptionally tall. I would love to have one of the cub cadet Zeon mower decks to play with....!
My current configuration has me towing my mower and this works surprisingly well. I have lots of run time and the modern 1hp motors don't seem to use hardly any more juice than the old mower motors. 

Maybe at the swap meet in Vermont there might be some new inspirations!






On 5/28/2014 8:30 AM, tb wrote:

Several years ago when I needed a deck I started researching whether an 
older ICE deck might be convertable, available, and relatively cheap, for 
use on the E-T.  Another lister ended up providing me with a E-T deck so I 
never finished the project, but still think it may be possible.  Anyone 
done it?

Thon


On May 27, 2014, at 10:18 AM, Graham Allan wrote:


I mostly just lurk here since I don't generally have that many troubles 
with my E15, but things have come to a head this weekend with my decrepit 
mower deck!

I had to do a fair bit of welding around the mounting arms last year, 
where the sheet metal was splitting - it was ugly, but held things 
together in that area. However now the shell of the deck is just splitting 
apart around the front caster mount, and all around the side exit; even 
with the side cover plate in place, it's generally weak and has been 
flexing a lot. It looks beyond welding this time, unless I really have no 
alternative, so I'm looking for a new deck or shell.

I will be checking with our usual trusty suppliers, but these aren't 
exactly easy to ship so I wanted to post on the off-chance there might be 
something around locally - I'm in Minneapolis/Saint Paul.

Thanks for any leads!

Graham

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak