For those of you that are playing at home......................
Klixon® is no longer under the TI umbrella.They've been spun off. so,
after tracking that down, I found this.
http://www.sensata.com/products/controls/tcb-c.htm
So if you feel compelled to set up your own testing station, those
are the specs.You can track down the traction motor external Klixon® by
following the appropriate links. A bit more digging should yield the
specs for the Klixon® found in the field of the traction motor.
Enjoy. :)
RJ
RJ Kanary wrote:
It is the over current / over temp protective device. Brought to
you by the nice folks at Texas Instruments some time before WW
II.Testing would require knowing the rating, and the amount of time
required for it to open at 100% of rating, 125% of rating, etc., plus a
derate for temperature.{Opens sooner the hotter it is.}
Not having any of that data in front of me, I look at the model
number of the Klixon®. In that number is usually the rating. Taking my
trusty Cornell / Dubilier Battery Eliminator,[Capable of 25 VDC @30A
max.] I select a current output to approximate the rating on the
Klixon®. Then connect the leads, stand back..........turn the power on
and watch ! If the Klixon opens within a second or two at room
temperature, I declare it good and return it to service.
Any time I've seen a mower motor with the armature melted down,
the Klixon has failed this test. Bear in mind, I'm not an EE, nor do I
portray one on Television..........................
RJ
soltrak wrote:
What exactly is the Klixon on the mower motor and how would you go
about checking it?
JL
On Nov 1, 2008, at 1:31 AM, RJ Kanary wrote:
Excessive current draw will cause overheating.A few moments with
an inductive ammeter would steer you in the correct direction. Poor
connections = high resistance = lotsa heat. That's another avenue
that needs to be explored.Another road to take is this............do
any of the Klixons® on the mower motors ever open?
The motor that takes the most abuse is usually the center
one. On the front mount mowers especially since the deck gets bent
and the front part of the blade's path is closer to the ground.If
THAT Klixon® fails closed, under those conditions wiring and
terminals will pay the price.
RJ
soltrak wrote:
Hello,
When mowing one of the front battery wires on my E12s gets so
hot at the terminal that it melted the thin plastic safety cover
that was touching it. I noticed several other battery tops getting
warm also, but this one wire gets hotter than the others. What
could be the cause?
Thanks,
JL
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
|