[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Disconnect maintenance on BB600 Elec-trak
On 25 Feb 2019 at 12:47, Chris Zach wrote:
> Since the lock washer was also discolored I dispensed with it and just
> tightened the brass bolt hard.
You really don't want to dispense with lock washers on a vehicle that
jolts
and vibrates. You'll be back in the same place before long.
Smart EV folks use lock washers on bolted connections. I'll use split
washers in a pinch, but my preference is for either Bellville (dished)
washers or wave washers. I keep a supply of them on hand in the sizes I'm
most likely to need.
David Roden - Akron, Ohio, USA
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Note: mail sent to the "etpost" address will not reach me. To send
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =