Re: (ET) E12 wiring

[Jim Coate <lists freerangeelectric com>]

What version of the E12 do you have (last two letters of serial number)?
I might have all the various wiring harnesses.
And David is correct on all counts about the controllers:
http://www.freerangeelectric.com/index.php?main_page=product_info&products_id=41

On 7/25/18 4:46 PM, David Roden wrote:
> On 25 Jul 2018 at 12:46, Dean Stuckmann via Elec-trak wrote:
>
> > Unless you are doing a complete restoration, I would consider
> > upgrading to an Altrax before a complete rewire
> You might get lucky and get one if there are any remaining in stock
> anywhere.  However, Alltrax no longer builds the DCX300-ET controller.
>
> The DCX300 range had gotten quite aged, and they've replaced it with a new
> series.  Unfortunately, sales of the DCX300-ET model weren't large enough 
> to
> justify the cost of developing an ET model for the new range.  There just
> weren't enough ET owners interested in that kind of improvement, I guess.
>
> Word is that Jim Coate is now selling a GE controller set up for ETs with
> wound field motors.  Unfortunately it's not cheap, but then the Alltrax
> wasn't either, there at the end.  And IMO the improvement in tractor
> usability with a PWM controller is worth the cost, but that's just me.
>
>
> David Roden - Akron, Ohio, USA
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Note: mail sent to the "etpost" address will not reach me.  To send
> me a private message, please use the address shown at the bottom
> of this page : http://www.evdl.org/help/
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak