Re: (ET) re-installing mower motor clutch body

["Briggs, Michael" <Michael Briggs unh edu>]

Thanks Harold and Jim. I suppose I should have already tried putting back 
together the one I've disassembled and cleaned up, to see how easily it 
would go back together. I'll give that a try tonight. I'm glad those 
should just slip back together!

Thanks again,
Mike


________________________________
Michael S. Briggs, PhD
UNH Physics Department
(603) 862-2828
________________________________

________________________________________
From: Harold Zimmerman - Clean Power Supply <cleanpower att net>
Sent: Tuesday, May 31, 2016 11:12 AM
To: Briggs, Michael; elec-trak cosmos phy tufts edu
Subject: Re: (ET)   re-installing mower motor clutch body

 Mike,
 Rust is usually what is holding these on. After you get the rust off of 
the shaft and out of the clutch body it should be a slip fit, at worst a 
very light tap fit.

On May 31, 2016 at 9:31am -0400, "Briggs, Michael" <Michael Briggs unh 
edu> wrote:

>Getting the clutch body off of those mower motors is a pain. Now I'm 
>wondering what method people generally use for re-installing them. The 
>instructions I've seen I think just say to reinstall everything in the 
>reverse order. The clutch body is just held on by friction, so it seems 
>like there are two main approaches - pounding (and putting something like 
>a block of wood over the flange to distribute the force) or pressing. I'm 
>guessing the latter would be the preferred method, to prevent damage? If 
>so, what kind of press do people generally use?
>
>Thanks,
>Mike
>
>________________________________
>Michael S. Briggs, PhD
>UNH Physics Department
>(603) 862-2828

------------------------------------------------------
Sent without a computer from my MailBug email machine.
landel.com, 1-855-MAILBUG, getmailbuginfo landel com
------------------------------------------------------
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://urldefense.proofpoint.com/v2/url?u=https-3A__cosmos.phy.tufts.edu_mailman_listinfo_elec-2Dtrak&d=CwICAg&c=c6MrceVCY5m5A_KAUkrdoA&r=kRHnlt3cKuWr4wuU8rx6ayYoAVctaoS9Z3cUPIkQn-k&m=y8is7UJucsJTwjMLYq0urO7Xv9ca2Oh1TzW4Mro8ek0&s=YGPjE6VgfKZYIRcsKx8Wxa5mP1g68JoyJP5c8spHttA&e=