[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) wheel horse c-185 lift using a small winch for mower lift?




Mark forwarded this off this morning.  It's a cool way to replace the cable with a lift strap.
http://s955.photobucket.com/albums/ae33/behaines/Winch%20on%20Wheel%20Horse%20C185/?action="">
(I tried to put the image in this message, but the list won't allow me to attach it)

On 6/13/2012 12:40 AM, Mark Frerking wrote:
Hi Brian,
 
Been following the forum discussion on the HF winch.  Here is a picture of how I converted one to use a lift strap.  Requires two  1-1/4" double split shaft collars and a short piece of 3/16" rod.
 
 
Best Regards,
 
Mark



On 6/12/2012 9:42 PM,
DAC8851 aol com wrote:
Hi Brian    Thank you for your input. I will use 12 volts. When you say do not use the stock lift switch are  you talking about the one that came with the winch or talking about using the one that is on the tractor now?
 
by the way I saw all your tractors.    when one breaks down you have 2 more :-)