[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) correct front lift attachment
Run it down to the plow frame and around a roller (bolt with sleeve) and
back up to lift arm and attach it with a quick release pin. That cuts the
plow weight in half versus lift motor load and it should respond better.
If the strap is long enough, put a roller on the lift arm and go back down
to the plow frame for more "leverage" or torque multiplication and secure
it to the plow frame.
...Walt
-----Original Message-----
From: elec-trak-bounces cosmos phy tufts edu
[mailto:elec-trak-bounces cosmos phy tufts edu]On Behalf Of Daniel
Childress
Sent: Saturday, February 17, 2007 6:03 PM
To: elec-trak cosmos phy tufts edu
Subject: (ET) correct front lift attachment
Just checking on how the lift strap is to be attached to the snow
blade. Presently it runs up through the lift brace and then down to
the plow. As I stated earlier the lift is slow or stops sometimes.
Need confirmation on how it should be attached.
Dan
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak