sounds like the reversing relay has welded itself shut. It should be
mounted on the inside of the "firewall". If it's an original it'll be of
an "open" deising that is the points are open to the air and not
enclosed. You might be able to pry them apart and dress the points back
to serviceable condition. IIf not check out hosfelt.com they have 24v
and 48v enclosed relays for under $5 each. I've used the 48v relays with
some success... others have used the 24v but I believe that requires the
addition of resistors or someone. check the archive for forward/revers
relay. there's a lot of discussion there about these.
Dave
Hi; Still having the problem with my E-12, I gave it as a E-15 before, (I
have one of those also.). Reverse works fine but no foward and when I put
it in
forward R1 and R2 Get RED hot! F1 and R1 relays check out OK. Thanks.
wahootonic
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak