[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) wiring



Thanks Neil -
I'm not taking out the solenoids.  What I meant was that I was removing
the circuit board which is the presumed charge controller.

Erick

>On my JD90,  also a single speed motor with tranny, there are two 
>solenoids that actually comtrol the drive motor and mower motors.  On 
>the drive motor, the clutch pedal has to be  "down" before the motor 
>will start.  on the mowers, the solenoid will dro out if you turn off 
>the key and the motor will "coast" down, the mower control switch  pits 
>a load on the motors to stop the rotation faster.
>
>I'd be careful about what you take out,  I'd guess that  those 
>solenoilds are needed.
>
>wombat
>
>_______________________________________________
>Elec-trak mailing list
>Elec-trak cosmos phy tufts edu
>https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak