Re: (ET) Transaxle leak

["RJ Kanary" <rjkanary nauticom net>]

    Speaking of JDs, I would love to lay hands on a DuoTrak® differential.
Any idea on where they are all hiding?
    BTW, I just went through all the Peerless® information that I have, and
could not find a 1700 series transaxle.

----- Original Message ----- 
From: "Michael J DeLiso" <mjdeliso juno com>
To: <rjkanary nauticom net>; <Elec-trak cosmos phy tufts edu>
Sent: Monday, February 16, 2004 10:09 AM
Subject: Re: (ET) Transaxle leak


> Not hard to fix, remove the spacer and added reverse idler, and reverse
> gears from old tranny.
> A lot of the parts and gears are the same in the 2300 series.
> I would think a bunch of the 1716 tranny parts are the same too, same
> case, axle housings.
> But I do not have parts list for 1716.
> Mike D
>
> On Sat, 14 Feb 2004 10:25:22 -0500 "RJ Kanary" <rjkanary nauticom net>
> writes:
> > If that be the case, the JD operators would have found one very
> > important
> > omission. The 2318 used in the GE had NO REVERSE.
> >
> > ----- Original Message ----- 
> > From: "Michael J DeLiso" <mjdeliso juno com>
> > To: <Oasis654 aol com>; <Elec-trak cosmos phy tufts edu>
> > Sent: Saturday, February 14, 2004 10:20 AM
> > Subject: Re: (ET) Transaxle leak
> >
> >
> > > Jon,
> > > The same tranny was used with single and dual belts on the input.
> > > My  E-12 and E 15's have the same 4 speed tranny.
> > > I think dual belts were used to get the motor power to the tranny
> > > on the larger horse power jobs. I have had the dual belts slip on
> > me
> > > plowing snow
> > > with the E15's but I never plowed with the E12.
> > > That tranny got more of a beating when it was coupled to a gas
> > engine.
> > > As J Deere did to it. A lot of Electraks saw their tranny's yanked
> > for
> > > replacements in Deeres.
> > > I would assume the 3 speed tranny in the E12 was a economic or
> > > availability decision by GE.
> > >
> > > Mike D
> > >
> > >
> > > On Wed, 11 Feb 2004 20:30:56 EST Oasis654 aol com writes:
> > > >
> > > > In a message dated 2/11/04 4:57:45 PM, mjdeliso juno com
> > writes:
> > > >
> > > > << The E12 has either a  2318, four speed  or 1716 three speed
> > > > Peerless. >>
> > > >
> > > > hi mike thanks for these numbers.  i was wondering if the tranny
> > for
> > > > the e12
> > > > was same as for e20.  i realize there's a difference in 2 belts
> > vs
> > > > 1, but are
> > > > the insides the same?  and i just did find out about the 3
> > speed
> > > > e12.  i
> > > > thought mine was broken or missing a gear, but found it was
> > built
> > > > that way.  i
> > > > wonder why?  jon
> > > >
> > > >
> > >
> > > _______________________________________________
> > > Elec-trak mailing list
> > > Elec-trak cosmos phy tufts edu
> > > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> > >
> >
> >
> >
>