[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Transaxle leak



Not hard to fix, remove the spacer and added reverse idler, and reverse
gears from old tranny.
A lot of the parts and gears are the same in the 2300 series. 
I would think a bunch of the 1716 tranny parts are the same too, same
case, axle housings.
But I do not have parts list for 1716.
Mike D

On Sat, 14 Feb 2004 10:25:22 -0500 "RJ Kanary" <rjkanary nauticom net>
writes:
> If that be the case, the JD operators would have found one very 
> important
> omission. The 2318 used in the GE had NO REVERSE.
> 
> ----- Original Message ----- 
> From: "Michael J DeLiso" <mjdeliso juno com>
> To: <Oasis654 aol com>; <Elec-trak cosmos phy tufts edu>
> Sent: Saturday, February 14, 2004 10:20 AM
> Subject: Re: (ET) Transaxle leak
> 
> 
> > Jon,
> > The same tranny was used with single and dual belts on the input.
> > My  E-12 and E 15's have the same 4 speed tranny.
> > I think dual belts were used to get the motor power to the tranny
> > on the larger horse power jobs. I have had the dual belts slip on 
> me
> > plowing snow
> > with the E15's but I never plowed with the E12.
> > That tranny got more of a beating when it was coupled to a gas 
> engine.
> > As J Deere did to it. A lot of Electraks saw their tranny's yanked 
> for
> > replacements in Deeres.
> > I would assume the 3 speed tranny in the E12 was a economic or
> > availability decision by GE.
> >
> > Mike D
> >
> >
> > On Wed, 11 Feb 2004 20:30:56 EST Oasis654 aol com writes:
> > >
> > > In a message dated 2/11/04 4:57:45 PM, mjdeliso juno com 
> writes:
> > >
> > > << The E12 has either a  2318, four speed  or 1716 three speed
> > > Peerless. >>
> > >
> > > hi mike thanks for these numbers.  i was wondering if the tranny 
> for
> > > the e12
> > > was same as for e20.  i realize there's a difference in 2 belts 
> vs
> > > 1, but are
> > > the insides the same?  and i just did find out about the 3 
> speed
> > > e12.  i
> > > thought mine was broken or missing a gear, but found it was 
> built
> > > that way.  i
> > > wonder why?  jon
> > >
> > >
> >
> > _______________________________________________
> > Elec-trak mailing list
> > Elec-trak cosmos phy tufts edu
> > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> >
> 
> 
>