Re: (ET) mower deck questions

["goodguyforsure" <goodguyforsure hotmail com>]

I just tried mowing with the helper springs hooked up with the first chain
link, instead of the third....much better, I can steer and the deck floats
better on my rough lawn.
John Briese
I-5
----- Original Message -----
From: "SteveS" <ssawtelle fcc net>
To: <elec-trak cosmos phy tufts edu>
Sent: Monday, June 16, 2003 7:10 AM
Subject: Re: (ET) mower deck questions


> One missing document from elec-trak.org is the mower manual, which is why
I
> posted it at:
>
> http://users.rcn.com/ssawtelle/
>
> You may have some subtle differences (I have only seen one mower deck 
> with
> the chain extensions on the springs), but it's a good start.
>
> The tiller I don't know....
>
> - SteveS
>
>
> ----- Original Message -----
> From: "Steve Richardson" <scr echoweb net>
> To: <>
> Sent: Saturday, June 14, 2003 7:24 PM
> Subject: Re: (ET) mower deck questions
>
>
> > I just got a mower deck for my E-15 a week ago and I didn't know it
needed
> > the guide bar until I saw one on the non functioning E-15 I got at the
> same
> > time I got the deck.  Does anyone have any up close pictures how the
deck
> is
> > attached ?  I also need a picture of the bar or mount that is used to
> attach
> > the tiller to the E-15 if some one may have that also.
> >
> > Thanks very much
> >
> > Steve Richardson
> > scr echoweb net
> >
> >
> > ----- Original Message -----
> > From: "Jim Coate" <jbc coate org>
> > To: <elec-trak cosmos phy tufts edu>
> > Sent: Saturday, June 14, 2003 10:32 AM
> > Subject: (ET) mower deck questions
> >
> >
> > > A few questions as I look more carefully at the mowing deck...
> > >
> > > - both of the support arms have a black plastic sleeve maybe 3" long.
Is
> > > this supposed to provided protection from where the arm rubs against
the
> > > front bracket? Is it time to replace since there are holes worn
through
> > > the plastic?
> > >
> > > - one of the arms has a "C" clip thing on it, but the other arm
doesn't.
> > > Are these clips to keep the black plastic sleeves from sliding off?
How
> > > important are they?
> > >
> > > - above the roller bar is a black rubber strip. With the deck 
> > > adjusted
> > > up fairly high, there is a gap between the rubber strip and the
rollers.
> > > Is this gap normal or has it worn off and I should replace the rubber
> > strip?
> > >
> > >
> > > TIA.
> > > _________
> > > Jim Coate
> > > 1992 Chevy S10
> > > 1970's Elec-Trak
> > > http://www.eeevee.com
> > >
> > >
> > > _______________________________________________
> > > Elec-trak mailing list
> > > Elec-trak cosmos phy tufts edu
> > > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> > >
> > >
> >
> >
> > _______________________________________________
> > Elec-trak mailing list
> > Elec-trak cosmos phy tufts edu
> > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> >
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>