Re: (ET) mower deck questions

["Steve Richardson" <scr echoweb net>]

I just got a mower deck for my E-15 a week ago and I didn't know it needed
the guide bar until I saw one on the non functioning E-15 I got at the same
time I got the deck.  Does anyone have any up close pictures how the deck 
is
attached ?  I also need a picture of the bar or mount that is used to 
attach
the tiller to the E-15 if some one may have that also.

Thanks very much

Steve Richardson
scr echoweb net


----- Original Message -----
From: "Jim Coate" <jbc coate org>
To: <elec-trak cosmos phy tufts edu>
Sent: Saturday, June 14, 2003 10:32 AM
Subject: (ET) mower deck questions


> A few questions as I look more carefully at the mowing deck...
>
> - both of the support arms have a black plastic sleeve maybe 3" long. Is
> this supposed to provided protection from where the arm rubs against the
> front bracket? Is it time to replace since there are holes worn through
> the plastic?
>
> - one of the arms has a "C" clip thing on it, but the other arm doesn't.
> Are these clips to keep the black plastic sleeves from sliding off? How
> important are they?
>
> - above the roller bar is a black rubber strip. With the deck adjusted
> up fairly high, there is a gap between the rubber strip and the rollers.
> Is this gap normal or has it worn off and I should replace the rubber
strip?
>
>
> TIA.
> _________
> Jim Coate
> 1992 Chevy S10
> 1970's Elec-Trak
> http://www.eeevee.com
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>