[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) E-15 Reverse relay Arcing

Subject: Re: (ET) E-15 Reverse relay Arcing
From: "SteveS" <ssawtelle fcc net>
Date: Fri, 2 May 2003 09:25:08 -0400
Delivery-date: Fri, 02 May 2003 09:20:17 -0400
Envelope-to: elec-trak-outgoing cosmos phy tufts edu
References: <F403B7ACC52329489E10CE443626344E03656E@server3.mdtelephone.com> <3EB1CEB9.1090306@computer.org>
Sender: owner-elec-trak cosmos phy tufts edu

- Yep, the schematic shows one. I'm not sure offhand where it is located,
but I imagine it's on the reverse relay or on a small card nearby.

Also  the E12S, E15 manual (Elec-Trak.Org) has reverse relay 
troubleshooting
and a service bulletin at the very end.


>
> There might be a varistor that goes across the relay to absorb the
> sparks, or a capacitor. If so I'd bet it's blown.
>

References:
- (ET) E-15 Reverse relay Arcing
  - From: Steve Caplan
- Re: (ET) E-15 Reverse relay Arcing
  - From: Chris Zach

Prev by Date: FW: (ET) E-15 Reverse relay Arcing
Next by Date: Re: (ET) ET-15 w/ two directions - reverse & reverse
Previous by thread: Re: (ET) E-15 Reverse relay Arcing
Next by thread: Re: (ET) E-15 Reverse relay Arcing
Index(es):
- Date
- Thread