[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Drive belts & pulling
- Subject: Re: (ET) Drive belts & pulling
- From: Jeremy Gagliardi com
- Date: Thu, 11 Jul 2002 09:57:59 -0400
- Organization: http://Jeremy.Gagliardi.com/
- References: <006b01c2288c$e37d08f0$0e01a8c0@dev1>
- Sender: owner-elec-trak cosmos phy tufts edu
SolidTech wrote:
> Also, I was thinking about going to the Longmont, CO pull (that's what
> spurred the drive belt swapping). Any suggestions? Leave the mower
> deck on
> for added up-front weight? Put some block/bricks into the weight box?
You definitely need lots more weight up front. I was pulling a wood
chipper with my E-20, which was way too heavy for it. I pulled a lot of
wheelies and my drive belts slipped a lot.
Are you allowed to pull backwards? As in, could you mount the sled to
the front of the tractor and go in reverse? Otherwise, is there a hitch
that can mount up front and run along the sides of the tractor to the
rear?
--
(============================)
mailto:Jeremy Gagliardi com
http://Jeremy.Gagliardi.com/
(============================)