[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: (ET) brakes
- From: Neil Dennis <wombat RealNS com>
- Date: Thu, 28 Jun 2001 22:18:49 -0400
- Sender: owner-elec-trak cosmos phy tufts edu
Marty, make sure the switch (near the brake pedal) is activated & not
bypassed. Like the suggestions, lube everything, I've found that if the
switch works, sometimes the pedal will stick down & suddenly (panic) the
drive motor won't run.
See you list a John Deere, I've been running an E-90 for probably 20
years, still runing but had to replace mower motor bearings this year.
Do have continual problems with charger.