[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) sickle bar motor



 Good Morning Mike,

 Without researching this too hard, I think this motor is either an E10M or E12 (permanent magnet version of course) drive motor. If you give me the length of the magnet housing without the end caps and the length of the magnets themselves I could tell you and maybe help you out. There may also be a model number inside the wiring cover which could be helpful.

 Sincerely,

 Harold Zimmerman


On 3/8/2025 5:23 PM, Mike Finck via Elec-trak wrote:
Gentlemen,I am trying to resurrect a Haban sickle bar attachment.  My immediate concern 
is the motor.  It has a broken magnet and bad bearings.  Three different rebuild 
shops have declined. I am pursuing 3 different avenues.1. Does anyone have more/any specs for 
this motor?  HP, rpms? GE serial/model number? Perhaps I could find a suitable substitute 
or parts.2. Speaking with others it seems there are only a couple original motors around. Any 
additional info on existing/surviving motors?3. The broken magnet seems the hardest puzzle 
piece to solve. Any suggestions?Thank you for any input.
As an aside, I (my ElecTrak collection) was the cover story of "Vintage Tractor 
Digest" magazine March/April 2025 issue. See attachment.
Mike.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20250308/7465f758/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 5.8MB pic.jpg
Type: image/jpeg
Size: 6043081 bytes
Desc: not available
URL: 
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20250308/7465f758/attachment.jpg>
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak


--
Harold Zimmerman
Clean Power Supply
Ephrata PA
717-859-4234