[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Tire size



 Hello Paul,
I run WDT P328 24x12x12 tires, with the rims flipped around to give a 
wider track. I'm fairly sure I ran them in the narrower track orientation 
for a while when I first mounted the tires, so the width should work 
either way.
I'm less certain that the 26" diameter would clear the downturn of the 
fender...you could always roll the edge of the fender up, which would 
weaken it, not that it really needs to be strong. That said I don't see 
much advantage running 26s over 24s.
Regards,Ben
    On Sunday, November 12, 2023 at 03:48:38 PM EST, RJ Kanary via 
Elec-trak <elec-trak cosmos phy tufts edu> wrote:  
 
       My early eight speed E-20 came shod with Firestone 10:50 - 12 that 
had Town & Country snow treads. They had holes in the cleats for studs, 
also.

RJ

On 11/9/2023 1:37 PM, Paul Anderegg wrote:
> Does anybody run 26x12x12 for the rear tires?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20231109/0998aaf5/attachment.htm>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20231120/3058df9e/attachment.htm>