Where is the best place to look for Leaf battery modules?
Posting mostly to follow.
Chris M
On Friday, February 10, 2023 at 08:16:48 PM CST, Chris Zach via
Elec-trak <elec-trak cosmos phy tufts edu> wrote:
Well, if you have 20 T105's then you have a 200ah 120v pack. The big
question is how much current can your controller pull at a shot, if it's
a 50kw then you're probably drawing around 400-500 amps peak.
If you went with say Leaf batteries you'd need to split the pack in half
then run both strings in parallel. Or get 2 leaf packs worth and run 4
strings in parallel. Either way you would need a custom BMS.
What's the peak input voltage on your controller? I have some of the USE
data up at https://www.crystel.com/use <https://www.crystel.com/use>
C
On 2/10/2023 11:24 AM, Jim Donovan wrote:
> Chris
>
> I follow you on the electrak list also and am intrigued with what you
mentioned about your 94 S-10 pack. I am putting a 2003 S-10 back on the
electric road (updating certain aspects most notably the clutches
system, I prefer a clutch but we won’t go into that for now). My final
step that I am entering is what to do for a pack. The truck is designed
for 20 T105’s (I love the old school, driveway conversions). Have
considered doing something else.
>
> Would it be possible to get information on what/how you did what you
have? In the old days I would look it up on the photo album but . . .
>
> Any thoughts or assistance would be helpful.
>
> Jim Donovan
> Westwood, KS
> KCMO area
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu <mailto:Elec-trak cosmos phy tufts edu>
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
<https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu <mailto:Elec-trak cosmos phy tufts edu>
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
<https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>