Re: (ET) fuel gauge meter (VM-1)

[David Tiefenbrunn <davidtief comcast net>]

It's just an analog meter.  IIRC, it's not linear, so low voltages don't register proportionally, but anything in the range the ET will run at normally, should show in the green.

Dave

On 11/23/2019 4:33 PM, Mike Finck via Elec-trak wrote:

I can't get the needle to move, it's all the way to the left, as if everything is off. I am getting 38v  across 13-05 and 5-01 (disconnect is engaged). I tried a substitute meter, same result. Is the meter waiting for something less than 38v in order to register a reading? AM-1 is working. Wires are in correct positions. Thanks. 

Mike

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak