[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Oops, I melted the connector



Um... no. The power drain was for the whole tractor. Deck, drive motor, and blower. Somehow I doubt it's pulling that much.

Also I have been working on the pack: As I mentioned in another post some of the interconnects needed cleaning and I still have a battery or two that needs a catch-up charge (going dead while others are still at 1.0vpc).

C

On 11/13/2019 8:17 PM, David Roden wrote:
No wonder.  If youir previous posts are right, you're running 180 amps
through a 50 amp connector.

You do realize that your vac is chowing down at the rate of 6.5 KILOwatts,
right?  And that's CONTINUOUS power, not peak.  It seems like an awful lot
of power to me, but what do I know?


David Roden - Akron, Ohio, USA

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Note: mail sent to the "etpost" address will not reach me.  To send
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =