Re: (ET) Mowet motors and paint

[john j casey <jjcrmc verizon net>]

Back in the day the oem paint was a typical automotive type, solvent for thinning. 

I have a couple posts about finishes available now.  Keep in mind there is some fading with the oem.

jack

On Jun 27, 2019, at 2:19 PM, Robert Mclane <1mclanebo gmail com> wrote:

Three questions for the group:

1.Has anyone been successful using an after-market 12V, 1hp motor, and if so, what rpm is appropriate for mowing?

2. Is the original Elec-trak yellow paint lead-based?

3. What are the size specs for the (E15) drive motor belts?

Thanks,

Bob McLane

On Fri, Jun 21, 2019, 8:45 AM Mike Finck via Elec-trak <elec-trak cosmos phy tufts edu> wrote:

Good morning Gentlemen

,

I have a question and then hopefully someone has the item!

 I want to be authentic about what rear reflector(s) are OEM for E20's. One that I have (DA) has a single narrow reflector above, and the same length as, the  ELEC-TRAK emblem. The other (EC) has two almost square ones at either side of the seat lid. I have no way of knowing if both are OEM or not. What do you think? Thanks. Mike

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak