|
They are welded in but not hardened. I cut / grind the heads off and punch them out. Sent from my T-Mobile 4G LTE device ------ Original message------ From: tb Date: Thu, May 30, 2019 8:59 AM To: et; Cc: Subject:(ET) 12M L-arm pins Drove into a rut and managed to snap off one of the pins in the mid-mount deck that holds the swivel end of an L-arm. The rest of it doesn’t seem to want to be punched out. Was it originally welded in? I imagine it’s a hardened pin so won’t want to be drilled out either?Thanks.Thon_______________________________________________Elec-trak mailing listElec-trak cosmos phy.tufts.eduhttps://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak |