[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Alternate chargers again



I haven't tried this on the BB600's, but I bought it for my leaf cell upgrade on my zeon hustler.  

http://www.chargery.com/doc/Chargery%20C10325%20manual%20V1.0.pdf 

If i get a chance i'll try it on the NiCds. But i highly doubt that'll be any time soon.  Gotta get the Zeon running and other projects done 1st. 

Tim 

On Wed, Apr 24, 2019 at 10:26 PM Chris Zach <cz alembic crystel com> wrote:
So my charger is insane. I'm guessing bad diodes (again) as the charger
is only drawing about 2a from the 110v outlet. Disconnecting the
capacitor drops that to <1a with a 20% PF so I think the cap is working.

Before I pull the charger (again) and replace the diodes (again) what
options are there for a good onboard charger? The only NiCD/NiMH one I
can find is a 1.5a charger which will take about 45 hours to charge the
pack.

BB600 NiCDs, charge to about 44 volts with the timer to keep things from
melting.

C

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak