Re: (ET) Rear Electric Lift

[Christopher Zach <cz alembic crystel com>]

It's pretty simple: The motor itself drives a gear which lifts the 
strap. You have a switch in there to switch +36v to either side of the 
shunt windings (for forward/reverse) that's it.

Pull the motor, pull the front (the bolts on the back are long and hold 
back to front) then check to see if the breaker is bad or not. If not 
you may have a shorted armature.
C



On 8/9/2016 2:07 PM, Ed Coughlin wrote:
> Is there such a thing as a shop manual for the rear electric lift? Mine
> has stopped working and I need some guidance on troubleshooting. The
> three page owners manual is not very informative. I'm getting 19 VDC to
> the motor, but no movement.
>
> Ed
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak