Re: (ET) She runs...but

[RJ Kanary <rjkanary consolidated net>]

       Common culprits are the lift motor, head lamp wiring mating with the armature limiters, and the large terminals on the armature contactors.  A lesser possibility would be the RTN circuit. Brake switch, seat switch and the wiring.

Rj

On 5/6/2015 11:02 AM, stupidemail5 lycos com wrote:

9-18 volts between chassis and various front battery terminals, changes when motor is under power. Not sure what I am supposed to see, but that seems wrong if chassis is meant to be isolated. Where to look? Charger?

 

 

On 2015-05-06 12:54, jlantonucci comcast net wrote:

Always check for voltage on the frame.  It can cause weird symptoms.

 

T-Mobile. America's First Nationwide 4G Network.

------ Original message------

From:

Date: Wed, May 6, 2015 6:53 AM

To: Elec-trak cosmos phy tufts edu;

Subject:(ET) She runs...but

 

So the ebay throwback machine runs. Cleaned the fuse contacts and lift and lights work, runs forward and reverse, mostly.

 

If I screw the fwd/rev relay to the panel, it gets flaky. I changed it out to a new one, same thing. I will have to check to see if there is an issue with voltage in the frame or something.

Ideas?

 

 

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

---

This email has been checked for viruses by Avast antivirus software. www.avast.com