[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ET) Gel Batteries



Hi David,
I'm building an ET for my better half and I was thinking about using gel batteries (I'm designing my own charger). I was wondering if you had lead/acid batts before as a power comparison and how the gels held up so far?

Thanks,
Rob

On another note, when I built my off grid battery box that is in my basement I lined the inside perimeter with ICE Shield. For those of you who don't know, it's a rubberized material we use it in cold climates on the edges and valleys of our roof under the shingles to keep water damage at bay. It's not cheap stuff but I had a roll from when I did my garage. One side has an adhesive and you can cut it into strips and overlap each strip to make a water proof seal. This is what I did on my off grid battery box and it seems to have worked out well.

Rob

-----Original Message----- From: elec-trak-request cosmos phy tufts edu
Sent: Saturday, July 27, 2013 9:10 AM
To: elec-trak cosmos phy tufts edu
Subject: Elec-trak Digest, Vol 11, Issue 135

Send Elec-trak mailing list submissions to
elec-trak cosmos phy tufts edu

To subscribe or unsubscribe via the World Wide Web, visit
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
or, via email, send a message with subject or body 'help' to
elec-trak-request cosmos phy tufts edu

You can reach the person managing the list at
elec-trak-owner cosmos phy tufts edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elec-trak digest..."


Today's Topics:

  1. Re:  Battery box corrosion (David Roden)
  2. Re:  Battery box corrosion (cz)
  3. Re:  Battery box corrosion (David Roden)
  4. Re:  Battery box corrosion (Chris Tromley)
  5. Re:  Battery box corrosion (james)


----------------------------------------------------------------------

Message: 1
Date: Fri, 26 Jul 2013 16:44:25 -0400
From: "David Roden" <etpost drmm net>
To: Elec-Trak Elec-Trak List <elec-trak cosmos phy tufts edu>
Subject: Re: (ET) Battery box corrosion
Message-ID: <51F2A769 12812 88B3872 etpost drmm net>
Content-Type: text/plain; charset=US-ASCII

On 16 Jul 2013 at 20:27, Andrew Poush wrote:

Any other suggestions about liner materials and methods to
prevent reoccurrence of rust in the boxes?

I've had zero battery box corrosion problems, probably because I use gel
batteries.  I don't recommend charging them with the stock ET charger,
though.


David Roden - Akron, Ohio, USA

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Note: mail sent to the "etpost" address will not reach me.  To send
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =



******************************************