[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Speed / power drain / reverse problems C185
Hi,
I had a similar problem caused by several speed control microswitches with
high resistance not allowing pulling in of. shorting relays.
This was on a E16 but very similar arrangement. (Toaster resistors always
in circuit)
On Aug 15, 2012, at 6:14 PM, Biophiliac wrote:
> Hi all,
> I believe I posted this question previously but still have yet to solve
> and actually use my C185 because of it.
>
> The problem (s):
> 1)Reverse only works in fast cruise mode (cruise never has worked also)
> and only by putting foot to floor. It jerks hard when engages /
> disengages, especially with D1and D2.
>
> 2)When moving forward especially noteable in D1 and D2 the power draw is
> HEAVY and the front resistance coil gets hot and burned smell. I have
> never used the tractor since I've acquired it other than test driving
> short distances, and I doubt the speed has reached more than 5-7 MPH.
>
> I have tried new contractors as per Harold and has not made any
> difference . (I appreciate your help Harold nonetheless ; and understand
> it was an educated guess)
>
> Jim C suggested it may be diode issues in the varistor board...but I am
> currently unemployed and can't afford to keep on guessing what's wrong.
> Could someone please help?
>
> Jef Spalding
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo.cgi/elec-trak
>