[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Cab wiper



If I remember right, the mounting screws to the cab had rubber grommets for mounting the unit to the cab.  I sold mine years ago, maybe someone else could also pitch in the write.  If you have it removed and still does not work, then yes you have a problem.
Garry East Tn  Now up in IL.
 
From: tmobile
Sent: Monday, June 20, 2011 2:24 PM
Subject: Re: (ET) Cab wiper
 
Please explain. I see two wires. One near the switch, and one near the motor. I assumed the one near the motor was ground. This one was not mounted on any rubber. I removed it completely for testing.
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.

Garry Freese <tnlighthouse bellsouth net> wrote:
Make sure the Wiper motor is NOT grounded.  It needs to be mounted with rubber grommets,
Garry East TN
 
From: tmobile
Sent: Monday, June 20, 2011 1:53 PM
Subject: (ET) Cab wiper
 
Restoring my newly found snow cab.. Thanks Eric.

She is already torn down and soaking in acid. Only problem I have so far is the wiper motor does not work. I bypassed the simple on off switch and no dice
Anybody know a suitable replacement?