Re: (ET) mower motor assy ?

[tbamc <tbamc gbta net>]

OK, I have the upper seal, which fits in the recess.  Is the lower seal 
1/4" or so larger in diameter than the upper?  I have one that size but 
note that it's ID is considerably larger than the armature shaft.  Is 
that correct?

Thanks.

Thon

Stan Witherspoon wrote:

> When I rebuilt my mower motors, 
> I found the remains of the upper motor seal stuck to the bottom of the lower bearing. You will find it when you pull the armature and bearing assembly out  and pull the bearing. With the old grass clippings and stuff it looks like part of the bearing. 
>
> Stan in Calif
>
> Sent from my iPhone
>
> On Jul 7, 2010, at 2:19 PM, tbamc <tbamc gbta net> wrote:
>
>  
>
> > I'm rebuilding one of my 4.5" motors.  In the Service Manual exploded 
> > picture they show  a moisture seal (upper) and a moisture seal (lower).  I only 
> > found one seal when I took this apart--the one between the shell and the blade 
> > hub (lower?).  Should there be an upper and where does it go?
> >
> > Thanks.
> >
> > Thon
> >
> > _______________________________________________
> > Elec-trak mailing list
> > Elec-trak cosmos phy tufts edu
> > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> >
> >    
>
>