From: Tim Humphrey <hump evgrin com>
To: "elec-trak cosmos phy tufts edu" <Elec-trak cosmos phy tufts edu>
Sent: Thu, June 3, 2010 3:26:23 PM
Subject: Re: (ET) Power of Elec-trak motors?
3hp drive motor and 3 1hp mower motors. So for this conversion, get a
3hp sep-ex golfcart type motor for the drive, and another one for the
mower blade. Power the mower with a simple switch, power the drive
with an alltrax controller.
On Thu, Jun 3, 2010 at 2:36 PM, David Roden <
etpost drmm net> wrote:
> On 3 Jun 2010 at 14:09, Christopher Zach wrote:
>
>> So if we do a little calculating knowing about 746 watts equals 1hp then we
>> can
look into things:
>
> Interesting, but forgive me for saying that you're not quite answering the
> question.
>
> The OP wanted to know what rating of motor to use for drive and what for
> mowing. However, you've given the TOTAL power USED by BOTH the drive and
> the accessories under certain conditions.
>
> And remember, you don't need a 12hp-rated motor go actually GET 12hp. Peak
> power of an electric motor is several times its rated power. I suspect a 2-
> 3 hp motor would be more than enough to drive a tractor.
>
>
> David Roden - Akron, Ohio, USA
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Note: mail sent to the "etpost" address will not reach me. To send
> me a private message, please use the address shown at the bottom
> of this page :
http://www.evdl.org/help/> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>
>
>
>
> _______________________________________________
> Elec-trak mailing list
>
Elec-trak cosmos phy tufts edu>
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts eduhttps://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak