Re: (ET) Power of Elec-trak motors?

[Tim Humphrey <hump evgrin com>]

3hp drive motor and 3 1hp mower motors. So for this conversion, get a
3hp sep-ex golfcart type motor for the drive, and another one for the
mower blade. Power the mower with a simple switch, power the drive
with an alltrax controller.

On Thu, Jun 3, 2010 at 2:36 PM, David Roden <etpost drmm net> wrote:
> On 3 Jun 2010 at 14:09, Christopher Zach wrote:
>
>> So if we do a little calculating knowing about 746 watts equals 1hp 
>> then we
>> can look into things:
>
> Interesting, but forgive me for saying that you're not quite answering 
> the
> question.
>
> The OP wanted to know what rating of motor to use for drive and what for
> mowing.  However, you've given the TOTAL power USED by BOTH the drive and
> the accessories under certain conditions.
>
> And remember, you don't need a 12hp-rated motor go actually GET 12hp. 
>  Peak
> power of an electric motor is several times its rated power.  I suspect 
> a 2-
> 3 hp motor would be more than enough to drive a tractor.
>
>
> David Roden - Akron, Ohio, USA
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Note: mail sent to the "etpost" address will not reach me.  To send
> me a private message, please use the address shown at the bottom
> of this page : http://www.evdl.org/help/
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>