(ET) Digital voltage meter - controller light

[dave maize <daize frontiernet net>]

Finally got around to installing a digital voltmeter to replace the 
old analog one.I ended up getting a Datel 8-50vdc two-wire LED meter 
which required me to make a plate to cover the old round hole so that 
I could mount it to the dash. Got the meter from metercenter.com.
  Also, about 1/4" below the meter, I drilled a 1/16" hole thru the 
mounting plate so that I could poke the end of a piece of fiber optic 
cable through, the other end of which is super glued to the little 
operating light on the Alltrax controller. That way, I can see if the 
green light of the controller is on.

 Cheers - DAve

photo is at 
http://www.flickr.com/photos/41059444@N07/sets/72157621803181347