[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Recommendations for modern replacements for the electronics?
The Manzanita Micro PFC-20 is a charger used on some larger EVs, but it
can also charge smaller battery packs. At $1860, it is way overkill
compared to the other chargers people are talking about if you only want
to use it for charging the lawn tractor, however it could make sense if
you have an electric car/truck you also want to use it with (it is
adjustable for a range of output voltages, not sure how easy it is to
adjust though). It can work on either 120v or 240v. It seems to be a
good charger according to people on the EVDL.
There's some EVDL discussion archived here:
Fred Walter wrote:
I have an E12 and an EGT100. I'm located in Ontario, Canada.
I'm looking for a battery pack charger, that will go into a maintenance
mode when the battery pack is fully charged (so I can leave it plugged
in all the time). I'd prefer one that will also try to desulphate
batteries. So far I've had the following recommended to me:
- external battery pack charger: Soniel 3610SRF
I have a welder's power outlet available to me for charging (220VAC) if
that would help speed up the charging process with a different charger.
(I'm told the above charger takes about 24hours to fully charge a 36volt
What motor controllers people are recommending? I've seen mention of
Alltrax, but not the model that was being used. Where can one get the
best price for one? (Keeping in mind that I'm in Canada.)
Any other recommendations when it comes to replacing or adding to the
electronics on my electric tractors?
Is there anyone in Canada that makes/sells replacement battery boxes?
Elec-trak mailing list
Elec-trak cosmos phy tufts edu