[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) E12 Stuck in Reverse/B145 traction motor overheating



Patrick McCabe wrote:
Two Issues:

My E12 was getting stuck in reverse and the machine needed to be shut off to correct the problem. This happened twice then arcing/sparking sounds came from the electronics under the steering wheel and now the machine has no forward or reverse. Any thoughts on what to troubleshot first? I have an E12M I could swap parts off.

The E12 has the push-pull contactors, I wonder if the linkages broke on one of them and they shorted out cold?

That would cause major fun from the steering wheel part. Pull the panels and check the contactors.

CZ


My B145 seems under powered and the traction motor heats up and shuts off after about 15 minutes of use. The brakes not stuck on and it has fresh gear oil. Do I need a new motor?

Thanks for any insights,

Patrick McCabe


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak