Re: (ET) Fw: Big day: E-15 back in service.

-M

On 12/21/07, Jerry Rhodes <jerry38 alltel net> wrote:

Well I don't mean to start something, but after a review of pass posts on
the alltrax I really can't come to buy one,  I've had one and did not like
the way it was made to hookup. I have used Curtis 1204 on several E-14,
E-15
and E20 and have no problems. I'm looking at a new controller and hope to
have a report on it soon, it has elect brake with park and a lot cheaper
than the DCX300 and it is not a alltrax or curtis.

Jerry NW Ohio

> ----- Original Message -----
> From: "David Roden" <etpost drmm net>
> To: < elec-trak cosmos phy tufts edu>
> Sent: Friday, December 21, 2007 4:58 PM
> Subject: Re: (ET) Big day: E-15 back in service.
>
>
>> On 21 Dec 2007 at 15:39, Pieter Litchfield wrote:
>>
>>> If I were you (and I'm pretty sure I'm not),
>>> I might want to think about spending the $$ for an Alltrax
>>> controller.
>>
>> Did I misunderstand Pieter's post?  The way I read it, he's using an
>> electronic controller, but it's a Curtis golf car controller instead of
>> the
>> Alltrax.  This works, but requires a separate means of control for the
>> motor
>> field, since the Curtis controllers are (mosty) series motor devices.
>> The
>> important thing is to make sure the field is always first on and last
>> off.
>>
>>
>> David Roden - Akron, Ohio, USA
>>
>> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>> Note: mail sent to the "etpost" address will not reach me.  To send
>> me a private message, please use the address shown at the bottom
>> of this page : http://www.evdl.org/help/
>> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>>
>>
>>
>>
>> _______________________________________________
>> Elec-trak mailing list
>> Elec-trak cosmos phy tufts edu
>> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>>
>
>

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak