[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) E15 Alltrax died



John Jeno 
>Question is, does the snow thrower generate a voltage spike when
>shutdown?

If all that happens to shut down the blower is a contactor opening then
absolutely.  Where it goes and if it is big enough to kill the controller
are separate questions.

>The power cord only has 2 wires hooked up to the drive, should the third
>be used ala the mower drive?

The third is presumably being used to brake the mower deck by shorting the
PM motor.  Snow blowers are not usually seen as having the same hazard.
Short sighted IMHO.  Maybe it come of hearing of farm machinery accidents
but I've a lot of respect for any implement that draws material in to chew
it up.

> Should there be a clamping diode in use?

I'd put one on just on general principle.  But back it up by shorting the
motor.  The diode takes the transient while the contactor closes across the
motor and then the contactor takes the brunt of the load.

I am assuming it's a PM motor.

> Thanks to whoever knows.


I'm just working from first principles.

>This e-mail and any attachments are confidential. If you are not the
>named or intended recipient, please notify the sender immediately and do
>not disclose the contents to any other person, use it for any purpose or
>store or copy the information in any medium. Any unauthorized
>disclosure, use or storage is prohibited and might be unlawful.

That's rather amusing.

Robert


--------------------------------------------------------------------
mail2web - Check your email from the web at
http://link.mail2web.com/mail2web