Re: (ET) Dan's 2/10A charger

["Dave & Deb" <daveb drizzle com>]

> On 2 Nov 2006 at 4:53, Dave & Deb wrote:
>
>> set a little low
>> 2.3v/cell
>
> I checked the spec sheet on their website and that's the float voltage,
> which is fine. The bulk phase termination voltage is 14.7 (2.45vpc), 
> about
> right (IMO) for golf car batteries.  It would also be OK for Hawker 
> Genesis
> and Optima AGM batteries, but it would be too high for most other AGMs, 
> and
> too high for >any< gel batteries I know of.
>
>
> David Roden - Akron, Ohio, USA
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
> Note: mail sent to the "etpost" address will not reach me.  To send
> me a private message, please use the address shown at the bottom
> of this page : http://www.evdl.org/help/
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>      To die for an idea is unquestionably noble.  But how much
>      nobler it would be if men died for ideas that were true!
>
>                                   -- H L Mencken
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>