[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Dan's 2/10A charger



On 2 Nov 2006 at 4:53, Dave & Deb wrote:

> set a little low
> 2.3v/cell

I checked the spec sheet on their website and that's the float voltage, 
which is fine. The bulk phase termination voltage is 14.7 (2.45vpc), about 
right (IMO) for golf car batteries.  It would also be OK for Hawker 
Genesis 
and Optima AGM batteries, but it would be too high for most other AGMs, 
and 
too high for >any< gel batteries I know of.


David Roden - Akron, Ohio, USA

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
Note: mail sent to the "etpost" address will not reach me.  To send 
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
     To die for an idea is unquestionably noble.  But how much 
     nobler it would be if men died for ideas that were true! 

                                  -- H L Mencken

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =