[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) EGT-200 Power usage problem



I located the problem.

 

I removed the shunt wire to check the length. It seemed a little long but in handling it one end did not seem right and a light pull pulled it right off. I crimped it and reinstalled it. The meter may be reading a little high, but it no longer pegs the meter full scale.

 

Thanks for pointing me in the right direction.

 

Dave

 


From: elec-trak-bounces cosmos phy tufts edu [mailto:elec-trak-bounces cosmos phy tufts edu] On Behalf Of Dave & Jean
Sent: Wednesday, September 27, 2006 8:38 PM
To: elec-trak cosmos phy tufts edu
Subject: (ET) EGT-200 Power usage problem

 

Thanks to Neil Dennis and David Robie for their response to my question. I will try checking things out tomorrow.

 

Dave

 

EGT-200

EGT-150

E-20

Black & Decker CMM1000