[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Mower Control



Dan,

 

 Replace the rubber or wooden rollers. They have worn down so much that they do not provide enough height for the edge to clear the ground.

 

  You do have them on the deck?

 

    See this picture.

 

      

http://wb9tlh.smugmug.com/gallery/863089/1/38901909

 

 Dwight

Dwight L. Hazen

Indiana University, UITS

Bloomington, In. 47408-7378

812-855-5367   

Ham Radio wb9tlh arrl net http://wb9tlh.ampr.us 

-----Original Message-----
From: elec-trak-bounces cosmos phy tufts edu [mailto:elec-trak-bounces cosmos phy tufts edu] On Behalf Of Dan Childress
Sent: Wednesday, September 27, 2006 12:30 PM
To: Elec-trak cosmos phy tufts edu
Subject: (ET) Mower Control

 

I am looking for an answer on how to prevent the mower from digging into the dirt and flipping over while backing up.  I seems very unsafe.  The rear corners dig into the dirt and therefore the mower turns up and exposes the whirling blades.  Suggestions?

Dan Childress

E-14

E-15