[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) charginf
Voltage regulation on GE charger. It's all academic, as the design of
the charger incorporates a timer and the timer is supposed to shut it
off, prevent battery overcharge, not the regulation of the charger. Note
all the hue and cry in the instruction book about how to set the timer
for aged batteries.
Another log on the fire of this battery charge thread
Dave
Weymouth MA
On Fri, 28 Jul 2006 16:12:44 -0400 Neil Dennis <wombatt gmail com>
writes:
> More beating on the poor horse. At room temp (like low 70's actual
> battery temp) a good lead acid batt should rest at between 2.1 and
> 2.2
> volts per cell, a charger at that voltage isn't going to do much
> other
> than maintain (and cause sulfation). It the batt itself is at a
> higher
> temp, it should read a higher voltage by a bit . I spent a lot of
> years
> working on charging systems for a big company, we built the voltage
> regulator for a 12 volt nominal system to control at 14.4 at 79
> degrees
> and up to 15.5 volts at engine compartment temps. So anyhow, the GE
>
> charger is designed to run at about 45 to 47 volts as per their
> manuals. So I guess they had a reason.
>
> wombat
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>