Have posted a steering diagram I received a few years ago at:
http://www.njcfsa.org/Steering.html
Hope this is helpful.
Richard "Zack" Zachary
Kleinbrahm, Bob wrote:
OK, I am in the process
of putting my E-20 back together
after a complete tear down for a frame weld job. I am having problems
with the steering gears meshing properly and have heard others talk
about
shimming them. My question is exactly what do you shim? The large
fan shaped gear is pinned to the shaft and doesn’t look like it can be
moved forward any. The pinion gear and the fan gear are not close
enough
causing the two to not mesh properly and are causing me headaches. How
do
I tighten this thing up?
Thanks,
Bob K
Bob
Kleinbrahm
Senior
Network
Engineer
First
Republic
Bank
San
Francisco,
CA. 94111
415
288-1478
rkleinbrahm firstrepublic com
The information transmitted is intended only for the person or entity
to which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received this in error, please contact the sender and delete the
material from any computer.
First Republic Bank and its subsidiaries do not take responsibility
for, or accept time-sensitive instructions sent by email including
orders, funds transfer instructions or stop payments on checks. All
instructions of this nature must be handled by direct communication,
not email.
We reserve the right to monitor and review the content of all email
communications sent or received. Emails sent to or from this address
may be stored in accordance with regulatory requirements.
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
|