[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ET) Thin shims

Subject: RE: (ET) Thin shims
From: "Markus Lorch" <mlorch vt edu>
Date: Tue, 19 Apr 2005 20:13:36 -0400
Importance: Normal
In-reply-to: <42659C60.2020208@computer.org>
List-archive: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak>
List-help: <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=help>
List-id: Electric tractor discussion list <elec-trak.cosmos.phy.tufts.edu>
List-post: <mailto:elec-trak@cosmos.phy.tufts.edu>
List-subscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=subscribe>
List-unsubscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=unsubscribe>

> In related news my tractor's cut-out at full power was related to a 
> mis-aligned relay. One of these days I will replace all the 
> relays with 
> nice 24 volt+resistor ones. Those in there tend to be very particular.

Chris,

try these:

http://www.surpluscenter.com/item.asp?UID=2005041919113835&catname=&qty=1&it
em=11-2382

They are enclosed, 36V, and seem more reliable than the original ones. 
Mike Wallace found them originally and told me and at one point posted 
them also to the elec-trak forum 

I got me a set but haven't installed them yet. 

The price is right at $4.99


Markus

Follow-Ups:
- RE: (ET) Thin shims
  - From: harry landis
- Re: (ET) Thin shims
  - From: Chris Zach

References:
- (ET) Thin shims
  - From: Christopher Zach

Prev by Date: (ET) Thin shims
Next by Date: (ET) replacing steering sector gear
Previous by thread: (ET) Thin shims
Next by thread: RE: (ET) Thin shims
Index(es):
- Date
- Thread