[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Lift motor



The E15 Manual, Troubleshooting Fig 4-1 shows an
armature connection that goes back to the battery pack
midpoint.  It also shows wires going to lift and lower
and another going to the lift switch.  This implies 4
wires.  There are 3 terminals on the lift motor, so
where is the 4th wire?
Thanks,
Rod
--- Rod Hower <rodhower ameritech net> wrote:

> The lift motor has 3 terminals, one 'horizontal' and
> two 'vertical'.  If I apply 18V to one pair it
> should
> lift and should lower between the other pair.
> I think my lift motor is fried.  Anybody have one
> avialable? Harold, do you have one in those recently
> listed parts?  I have lots of EV stuff to trade for
> this motor, so bring it on.
> I got the blade mounted with the lists help (thanks
> Markus for those pictures!)  Now I need to lift and
> lower, but I think my motor is cooked.
> Thanks,
> Rod
> 
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
>
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>