[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Blade attachment



Check the www.elec-trak.org website again.

Look at the Resources and click the Wheel Horse Dozer manual.

It is only one page.  Notice the Front Mounting Bracket at the bottom of 
the
picture.

This mounting bracket replaces the mower bracket with the two round rods.
The mower bracket
rods keep the front mower deck "shock absorbers" from hitting the tractor
when you turn.

The dozer blade "ears" go over the big round bar at the bottom of the Front
Mounting Bracket.

Monty McGraw
I-5 Elec-Trak

PS- I just bought one of the Wheel Horse Large Dozer Blades and bracket on
Ebay.  It has a bracket
that attaches to the transmission under the tractor.


----- Original Message ----- 
From: "Rod Hower" <rodhower ameritech net>
To: <elec-trak cosmos phy tufts edu>
Sent: Monday, November 01, 2004 6:49 PM
Subject: Re: (ET) Blade attachment


> I looked through the accessories catalog on
> elec-trak.org but there was no good diagrams showing
> how the blade attachs.
> I also looked at the gallery and seen Rob Vasichek's
> tractor with a blade, but it was at a bad angle.
> Does anybody have good pictures that show how the
> blade is attached?
> If you have some email me direct.
> Thanks,
> Rod
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.778 / Virus Database: 525 - Release Date: 10/20/2004