[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Soneil 3610SRF (was Re: (ET) Charger working?)
The Soneil 3610 has 3 pins out.
obviously (i think) I only need 2 pins. But which 2
pins
since i think it is switching PS, no power should flo
without a load and the 3 pins are close together.
how did you Darryl hook yours up?
robert
--- Darryl McMahon <darryl econogics com> wrote:
> Here's a charger option I have not seen posted
> before. The Soneil 3610SRF.
>
>
http://www.soneil.com/Complete%20sets/3610SRF(Rev03).15-Jul-03.pdf
>
> I have one installed on my E12 now (which has now
> blown its 3rd charger capacitor).
> This thing is small - I have it sitting on the shelf
> beside the original charger.
> What I really like about this charger is that it is
> designed to be left plugged in
> and operate unattended. No timer. It is
> intelligent and senses when the voltage
> drops, and then charges up again. At peak charge
> (maintaining), I saw the voltage
> get to 44.3 volts - briefly. Then it settled back
> to the mid-42 volt range for a
> few minutes, then the charger shut off again. Ideal
> for me in summer when tractor
> is located at cottage (and I'm not).
>
> US$145 plus shipping. I haven't had this unit long,
> but so far, it works as
> advertised. May not be your first choice if fast
> charging is a requirement, but
> then the stock unit is pretty leisurely too. (I
> have hooked up a heavy-duty variac
> based charger - 30 amps + when I wanted faster
> charging.)
>
> Darryl McMahon
>
> From: "paul gilbertson"
> <paul gilbertson net>
> To: <elec-trak cosmos phy tufts edu>
> Date sent: Sat, 26 Jun 2004 12:02:33 -0500
> Subject: (ET) Charger working?
> Send reply to: paul gilbertson net
>
>
<mailto:elec-trak-request cosmos phy tufts edu?subject=unsubscribe>
>
>
<mailto:elec-trak-request cosmos phy tufts edu?subject=subscribe>
>
> > I have a E15 that I just got working. I have been
> mowing every few
> > weeks and am very happy. (Purchased a set of 6
> batts from Sams.)
> >
> > Every time I mow I set the charger to 1-2 and then
> let it charge.
> > However every time I'm ready to start mowing the
> fuel gauge hasn't moved
> > very far into the green. But I am able to mow the
> lawn.
> >
> > So the question is, how can I tell if the charger
> is working and how
> > well? What are the other options for charging the
> batts?
> >
> > Thanks
> >
> > Paul
> >
> > -----Original Message-----
> > From: elec-trak-bounces cosmos phy tufts edu
> > [mailto:elec-trak-bounces cosmos phy tufts edu] On
> Behalf Of
> > elec-trak-request cosmos phy tufts edu
> > Sent: Friday, June 25, 2004 10:59 AM
> > To: elec-trak cosmos phy tufts edu
> > Subject: Elec-trak Digest, Vol 2, Issue 303
> >
> >
> > Send Elec-trak mailing list submissions to
> > elec-trak cosmos phy tufts edu
> >
> > To subscribe or unsubscribe via the World Wide
> Web, visit
> >
>
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> > or, via email, send a message with subject or body
> 'help' to
> > elec-trak-request cosmos phy tufts edu
> >
> > You can reach the person managing the list at
> > elec-trak-owner cosmos phy tufts edu
> >
> > When replying, please edit your Subject line so it
> is more specific than
> > "Re: Contents of Elec-trak digest..."
> >
> >
> > Today's Topics:
> >
> > 1. E12 M (Messa, Corbett (GE Infrastructure))
> > 2. RE: E12 M (Elie, Larry (L.D.))
> > 3. EGT200 wanted (cleanpower att net)
> >
> >
> >
>
----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 25 Jun 2004 09:29:52 -0500
> > From: "Messa, Corbett \(GE Infrastructure\)"
> > <Corbett Messa gefanuc com>
> > Subject: (ET) E12 M
> > To: <elec-trak cosmos phy tufts edu>
> > Message-ID:
> >
> >
>
<4606624A2A8ABE41AFBA5F8306F2ECB20BAF4EDD FTWMLVEM01 e2k ad ge com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Speaking of E12M's, according to the brochures on
> elec-trak.org, the
> > E12M can handle the snow blower and the front
> blade. The only thing it
> > cannot handle looks to be the rear tiller. Is this
> true with all E12M's.
> > The brochure was just for 72.
> >
> > Any drawbacks to using an E12M with a blade and
> snow blower?
> >
> > Thanks,
> > Corbett
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Fri, 25 Jun 2004 11:30:54 -0400
> > From: "Elie, Larry \(L.D.\)" <lelie ford com>
> > Subject: RE: (ET) E12 M
> > To: "Messa, Corbett \(GE Infrastructure\)"
> > <Corbett Messa gefanuc com>,
> <elec-trak cosmos phy tufts edu>
> > Message-ID:
> >
> >
>
<FCD6D78D8DDFB54989023EF5D3A2893B01DA60DB na1ecm55 dearborn ford com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > It has a poor tuning radius with the blower.
> >
> > Larry Elie
> >
> >
> > -----Original Message-----
> > From: elec-trak-bounces cosmos phy tufts edu
> > [mailto:elec-trak-bounces cosmos phy tufts edu]On
> Behalf Of Messa,
> > Corbett (GE Infrastructure)
> > Sent: Friday, June 25, 2004 10:30 AM
> > To: elec-trak cosmos phy tufts edu
> > Subject: (ET) E12 M
> >
> >
> > Speaking of E12M's, according to the brochures on
> elec-trak.org, the
> > E12M can handle the snow blower and the front
> blade. The only thing it
> > cannot handle looks to be the rear tiller. Is this
> true with all E12M's.
> > The brochure was just for 72.
> >
> > Any drawbacks to using an E12M with a blade and
> snow blower?
> >
> > Thanks,
> > Corbett
> >
> > _______________________________________________
> > Elec-trak mailing list
> > Elec-trak cosmos phy tufts edu
> >
>
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Fri, 25 Jun 2004 15:35:43 +0000
> > From: cleanpower att net
> > Subject: (ET) EGT200 wanted
> > To: elec-trak cosmos phy tufts edu
> > Message-ID:
> >
> >
>
<062520041535.27719.40DC464F0009414A00006C4721587667559D0A99019F020E0A04
> > 0C att net>
> >
> >
> > Hi All
> > I am looking to purchase a New Idea EGT 200 in any
> condition. Thanks,
> > Harold Zimmerman 717-859-4234
>
=== message truncated ===