Re: (ET) steering stuff

["Dave & Deb" <daveb drizzle com>]

My E12S has the thermal switch on the drive motor with only one pulley,
wires 5 and 2 connect to it on the forward facing side of the motor. My
understanding is that the E12S is somewhere in the middle of the E12 and
E15 perhaps an E12 with an E15 motor?

Dave
Seattle

> If it has a thermal switch it might be an E20 motor. Still, why only one
>  drive pulley? This is the second time I've heard of this (one pulley
> and  belt) were all E15's single belt drive with the only dual belt
> being the  E20?
>
> How much for it? I'd be interested for a future tiller conversion.
>
> Chris
>
>
> neil wrote:
>
>> Sorry, everyone, the two gear sets I've got are gone, Steve and
>> Marcus  were first in..  I don't have any decals for the panels that
>> are any  good, the panel I have is a piece of moded plastic with words
>> cast in,  all black now, used to have white painted lettering.
>> Have a drive motor  from the e-15, (not checked yet) and  one from an
>> unknown model.  This is about 4" dia and 16" long with single drive
>> pulley, it runs ok on 12 volts.. Has a heavy red and black wire plus a
>>  couple light gage wires, maybe thermal switch.
>>
>> wombat
>>
>> _______________________________________________
>> Elec-trak mailing list
>> Elec-trak cosmos phy tufts edu
>> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>>
>>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak