Re: (ET) steering stuff - E15 motor pic

["Dave & Deb" <daveb drizzle com>]

Chris,
 in the picture of your motor is that the thermal switch to the left of
the armature lug?   on my E12S they are 180degs from each other on the
same end of the motor (left as you sit on tractor) and the field wires
are next to the arm lug (A1) and Stator(?) S1 lug.

Dave
Seattle

> My E15 has a double pulley,
> see picture at;
>
> http://www.qsl.net/w8rnh/etrakh/image7.html
> --- Christopher Zach <czach computer org> wrote:
>> If it has a thermal switch it might be an E20 motor.
>> Still, why only one
>> drive pulley? This is the second time I've heard of
>> this (one pulley and
>> belt) were all E15's single belt drive with the only
>> dual belt being the
>> E20?
>>
>> How much for it? I'd be interested for a future
>> tiller conversion.
>>
>> Chris
>>
>>
>> neil wrote:
>>
>> > Sorry, everyone, the two gear sets I've got are
>> gone, Steve and  Marcus
>> > were first in..  I don't have any decals for the
>> panels that are any
>> > good, the panel I have is a piece of moded plastic
>> with words cast in,
>> > all black now, used to have white painted
>> lettering.
>> > Have a drive motor  from the e-15, (not checked
>> yet) and  one from an
>> > unknown model.  This is about 4" dia and 16" long
>> with single drive
>> > pulley, it runs ok on 12 volts.. Has a heavy red
>> and black wire plus a
>> > couple light gage wires, maybe thermal switch.
>> >
>> > wombat
>> >
>> > _______________________________________________
>> > Elec-trak mailing list
>> > Elec-trak cosmos phy tufts edu
>> >
>>
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>> >
>> >
>>
>>
>> _______________________________________________
>> Elec-trak mailing list
>> Elec-trak cosmos phy tufts edu
>>
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak