[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ET) Parts lists...
With Bill gone for now, I feel more comfortable giving part numbers and
sources for parts
that work well with the ET. I didn't want to do it when Bill was doing
supply, but that's
over. Today's part is the back deck roller.
The Murray MU 92137 roller is the proper (2.5") diameter black (abs?)
plastic roller and 6" long.
To do a full size deck you need 3. The ET uses a 5/8" shaft in back, so
the Murray needs to be
reamed to 5/8" + 1/64" (41/64") to spin freely. They go for about $6 each
at Ace Hardware as a
special order. There are some 4" rollers that are the right inside
diameter already, but you
need 7 and a half of them (have to cut one) use more washers, and they are
the same price each,
so I pick $30 and some drilling over $48 any day of the week. There may
be better fits out
there as well.
I also have some part numbers for sealed bearings for the deck motors.
I'm sure others also
have collected part numbers of compatible parts over the years. An online
list would seem